4C by Alfaworks

How fast do you want to go?

Cool

About Us

Who we are and our philosophy

AlfaWorks is the performance arm of the Alfa Workshop. We are an Alfa Romeo specialist in the UK of 30 years standing and with a sector leading record for customer satisfaction. Our ethos is to provide the best possible solutions for your performance needs. The products we sell are all thoroughly tested by us and you can rest assured that the solution we have found will be the best available on the market. Every product on the site is designed to meet a specific need, and the performance gain, design and relevant solution is documented in the part description and subsequent fitting guides.


We also offer a bespoke fitting service where we can offer a one-stop shop supplying and fitting the parts you require, together with the ongoing servicing. As with all our clientele, you will always get a straight answer from us about how any performance upgrade will improve your 4C.



Cool

4C Philosophy

Our philosophy with the 4C is simple: make it light, make it fast. We see the excellent 4C chassis that Alfa has given us as just a starting point, and by adding higher quality parts we can put the 4C truly into the supercar bracket. We differ from many performance car specialists in that we have personally developed the parts we supply and are working exclusively with our parts manufacturers who are among the best and most reputable in their fields to achieve what we believe is an exceptional product.


We decided on a simple formula which is either cost per bhp increase, or per kilo reduced, on a roughly 1:4 basis. So if a modification gives us either a 1 bhp increase or reduces the weight by 4kg, we were willing to pay X amount. The 1:4 ratio comes from the 4C's present power to weight ratio. For anything performance-wise that was less than this figure, we had to justify it on either aesthetic grounds, practical grounds or not do it.


Cool

Product Under Development

We are happy to give you insight into our development plans. You can register your interest in projects from the consultation to the final testing stages, and we will update you regularly with progress. The speed that a project progresses can often be related to the amount of interest expressed, so please register if genuinely interested. We will open Pre-Orders towards the end of final testing, which will guarantee a reservation from the initial production run. Once the project is about to go on general release, it will be moved to the Products section below.


If you don't find a product that you might be interested in, please drop us a line at development@alfaworks.co.uk as we'd be very interested to hear your thoughts.






Engine


 





Brakes & steering


  • Paddle
    Carbon fibre paddle extensions. Just spit balling! We are looking into this reasonably seriously but what do you think of the look?. Performance Category: Race, Track Day, Fast Road.
    Estimated price range £80-100 excl taxes


  • Brake discs
    Carbon disc. Latest technology continuous-carbon fibre construction superseding more traditional chopped-fibres carbon-ceramic brakes. Advantages include much improved heat management and therefore better performance/weight and consistent performance at all operating temperatures, and lower wear rates. Weight savings of around 20kg in unsprung weight when compared to iron discs. Performance Category: Race.
    Approx £2000 per disk!!!


 





Exterior Bodywork


  • High performance carbon fibre bodywork
    The prototype panels have now been trial fitted to a 4C. Our body panels are moulded in Carbon fibre 3k 2/2 Twill 200gsm. The front splitter is moved forward slightly to create slightly more down force and the use of carbon fibre has allowed us to trim the weight of the bumper right down. The side sills are also made of carbon with the left hand side of the car having an air intake for the gearbox cooling while on the right hand side of the car is a cold air intake for the engine. The rear bumper and diffuser are also modified to increase the size of the diffuser to aid with ground effect while the extensive use of Carbon fibre reduces the weight considerably. This product is in the final stages of testing and is available to order now.
    See our CAD Video (Turn on loop and use Pause).
    Performance Category: Race, Track Day, Fast Road.
    Performance upgrades for the 4C
    Alfaworks 4C carbon fibre bodywork
    £8,500 excl tax


  • Carbon Boot Lid
    Carbon fibre boot lid, this is designed to significantly reduce the weight of the tailgate. Its design is as simple as we could make it to keep weight to an absolute minimum.



  • Carbon Rear Spoiler
    We haven't yet committed to this design, so if you have any feedback, click on the "Register Interest" button below.
    See our CAD Video (Turn on loop and use Pause).



 

Section 4

Product for MiTo

We ship worldwide

Costs can be seen once you've added your products to your cart.
Tax is included for EU shipments, deducted elsewhere (there may be local taxes to pay on importation - further info in your cart). Also, see our main MiTo Parts page for our full range of spares.

For enquiries, add the products that you are interested in to the cart and click on the Enquire button.





MiTo Suspension


  • ANTI roll bar

    REAR adjustable torsion bar kit

    Our Price: £325.00 excl tax



Section 5

Product for Giulietta

We ship worldwide

Costs can be seen once you've added your products to your cart.
Tax is included for EU shipments, deducted elsewhere (there may be local taxes to pay on importation - further info in your cart). Also, see our main Giulietta Parts page for our full range of spares.

For enquiries, add the products that you are interested in to the cart and click on the Enquire button.





Giulietta Engine


  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.
    Black Series for Motorsport use: Race, Rally and Track
    .

    Our Price: £24.70 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.

    Our Price: £22.45 excl tax




  • Flywheel
    Lightened solid flywheel (to be used with clutch 1750MCTCH).
    Weight: 5.164kg
    NOT for TCT gearbox.

    Our Price: £450.00 excl tax




  • Conrod Set
    Set of x4 con rods for 2.0 litre conversion on 1750 engine, you will need a modified crank to suit the 1750 block. Our steel con rods are fully machined by Arrow to our specification using double air re-melted 817M40 forgings. All rods are shot peened using a fully automated process to increase fatigue strength and durability. The rods are balanced end over end into matched engine sets and are 100% magnaflux crack detected prior to final inspection by CMM in a temperature controlled inspection department. Our design team worked closely with Arrow using the latest CAD CAM technology to optimise the design for full race applications. As part of the design process, we also worked closely with the fastener manufacturer, ARP, to select the best available bolts for this project.

    Our Price: £1650.00 excl tax




  • Cam shaft
    Performance cam shafts.
    STAGE 1

    Our Price: £1200.00 excl tax







Giulietta Engine management


  • Injector
    FUEL injector.
    For tuned engines producing in excess of 380hp
    PETROL

    Our Price: £135.00 excl tax







Giulietta Brakes & steering


  • Brake discs

    FRONT - vented
    (with counter sunk locating hole)
    DRILLED
    Supplied as a pair
    330mm diameter (Hub ID 70mm)
    .

    Our Price: £150.00 excl tax







Giulietta Suspension


  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.
    Black Series for Motorsport use: Race, Rally and Track
    .

    Our Price: £24.70 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.

    Our Price: £22.45 excl tax







Giulietta Clutch


  • CLUTCH

    Lightened clutch kit for manual gearbox (to be used with flywheel 1750MFLYW) x6 bolts included. Will take over 750 nm so will be able to take the power output of even the most powerful 2.0l conversion
    Weight: 4.58kg.

    Our Price: £730.00 excl tax




  • CLUTCH kit

    Upgraded TCT clutch kit. These are necessary if you start getting to serious power outputs (300+ BHP) they combine the softer engagement of a standard clutch with the durability of a sintered clutch.

    *Uprated pressure plates in both covers.
    *Uprated cover driven straps (to increase lift and power to the clutch)
    *Uprated drive plate friction material on both plates (three compound)
    *Fabricated solid steel plate for the centre of the kit (changing it from cast iron to steel).


    Our Price: £1250.00 excl tax



Section 6

Product for 4C

We ship worldwide

Costs can be seen once you've added your products to your cart.
Tax is included for EU shipments, deducted elsewhere (there may be local taxes to pay on importation - further info in your cart). Also, see our main 4C Parts page for our full range of spares.

For enquiries, add the products that you are interested in to the cart and click on the Enquire button.





4C Engine


  • HYBRID turbo
    STAGE 2 with a BOSCH ECU
    Specs of upgraded turbo...
    - Compressor housing machined to suit larger wheels.
    - Larger K06 size compressor wheel.
    - Motorsport specification thrust bearing assembly.
    - Balanced to motorsport blueprints.
    - Original vacuum operated waste gate.
    - Uses standard Alfa Romeo engine ECU with maps to suit the turbo.
    It has a revised launch control strategy, a raised rev limit. This is a plug and play component and it has none of the boost pressure limits of the standard Alfa ECU. The kit comes with all the gaskets and oil lines needed to fit the turbo.
    PLEASE NOTE - THIS PRICE INCLUDES A SURCHARGE OF £1000.00 PLUS VAT WHICH WILL BE REFUNDED ON RETURN OF A SERVICABLE TURBO AND THE ORIGINAL ECU.

    Our Price: £3951.87 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.
    Black Series for Motorsport use: Race, Rally and Track
    .

    Our Price: £24.70 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.

    Our Price: £22.45 excl tax




  • Crankshaft
    Crankshaft for 2.0 litre engine conversion. The crank is modified to fit into the 1750 block and then it is balanced dynamically to give the smoothest possible performance.

    Our Price: £973.33 excl tax




  • Piston Set
    Set of x4 pistons for the 1750 and 2.0 litre engine conversion (with rings), CNC machined from forged billet rated to 500 bhp, these are a direct replacement piston. These are 3D machined to our specification by Omega pistons. Each piston is 3D machined from a solid billet. This takes approximately 90 minutes per piston due to the complexity of the pistons design. Once the machining is complete the piston is wet blast cleaned and inspected by Omega's highly trained staff to ensure the outstanding quantity they are renowned for.

    Our Price: £1000.00 excl tax




  • Cam shaft
    Performance cam shafts (gives more lift and duration).
    STAGE 2

    Our Price: £1300.00 excl tax




  • Turbo
    ALFAWORKS twin scroll turbocharger.
    INCLUDING exhaust manifold and downpipe.

    Our Price: £5153.33 excl tax




  • Exhaust Downpipe
    Exhaust downpipe to be used with AlfaWorks twin scroll turbocharger and exhaust manifold.

    Our Price: £1070.00 excl tax




  • Flywheel
    Lightened solid flywheel (to be used with clutch 1750MCTCH).
    Weight: 5.164kg
    NOT for TCT gearbox.

    Our Price: £450.00 excl tax




  • Conrod Set
    Set of x4 con rods for 2.0 litre conversion on 1750 engine, you will need a modified crank to suit the 1750 block. Our steel con rods are fully machined by Arrow to our specification using double air re-melted 817M40 forgings. All rods are shot peened using a fully automated process to increase fatigue strength and durability. The rods are balanced end over end into matched engine sets and are 100% magnaflux crack detected prior to final inspection by CMM in a temperature controlled inspection department. Our design team worked closely with Arrow using the latest CAD CAM technology to optimise the design for full race applications. As part of the design process, we also worked closely with the fastener manufacturer, ARP, to select the best available bolts for this project.

    Our Price: £1650.00 excl tax




  • Cam shaft
    Performance cam shafts.
    STAGE 1

    Our Price: £1200.00 excl tax




  • Con rod
    Set of four I beam con rods with bushes and bolts for the 1750 engine. Our steel con rods are fully machined by Arrow to our specification using double air re-melted 817M40 forgings. All rods are shot peened using a fully automated process to increase fatigue strength and durability. The rods are balanced end over end into matched engine sets and are 100% magnaflux crack detected prior to final inspection by CMM in a temperature controlled inspection department. Our design team worked closely with Arrow using the latest CAD CAM technology to optimise the design for full race applications. As part of the design process, we also worked closely with the fastener manufacturer, ARP, to select the best available bolts for this project.

    Our Price: £1420.00 excl tax




  • Clips
    STAINLESS silicone hose clips.
    For Samco hose kit TCS654 (x6 supplied).

    Our Price: £7.65 excl tax




  • Clips
    STAINLESS silicone hose clips.
    For Samco turbo hose 50531804 (x2 supplied)
    60-80mm and 70-90mm.

    Our Price: £6.85 excl tax




  • Clips
    STAINLESS silicone hose clips.
    x2 supplied
    60-80mm and 70-90mm.

    Our Price: £6.00 excl tax




  • Hose
    SILICONE hose (clips TBHC2 supplied separately).
    Turbo to air flow meter
    Red.

    Our Price: £120.00 excl tax




  • Hose
    SILICONE turbo hose kit (clip kit TBHC6 supplied separately).
    This kit contains all the three pressure hoses from the turbo to the inlet manifold, the hoses are triple reinforced for better boost pressure management under extreme conditions.
    These are absolutely perfect for track use.

    Red
    4C Intercooler hose upgrade/change to Samco hoses.

    Our Price: £270.00 excl tax




  • Cylinder Head
    Stage 2: Gas flowed (exchange unit - price includes a £800.00 + VAT surcharge which will be refunded on return of the old unit). This is a service we offer for the 4C, The standard cylinder head is optimised by Alfa Romeo to give significant turbulence in the combustion chamber, this helps to get a very good burn at low power outputs when the engine is running in stratified charge operation, however it is not optimal for large power outputs. The gas flowing of the cylinder head and 'knife edging' of the ports adds to top end power by removing some of the disturbance to the air flow. This will add around 25 bhp to the engine output while still maintaining the same boost pressure.
    *Price does NOT include shipping charges.

    Our Price: £1500.00 excl tax




  • Engine
    2.0 LITRE engine conversion.
    If you want the ultimate performance modification this is probably it, 2.0 Litre engine with power outputs up to 500 Bhp if required!
    This engine is built to touring car specifications. It's fitted with new crankshaft, Arrow H beam con rods, Omega forged pistons, camshafts, tubular exhaust manifold and Twin scroll turbo charger with a race ECU.
    This is a bespoke product and can be manufactured to any specification you require

    Performance Category: Race
    * Price does NOT include shipping charges of the product or the exchange cylinder head.
    * We strongely recommend that the differential and clutch is upgraded (also NOT included in the price)
    .

    Our Price: £14401.64 excl tax




  • Helmholtz Exhaust
    Exhaust system with Helmholtz resonator. This is a straight through system and it uses a resonator to remove the drone at around 80mph. It comes with carbon tips which can be angled as you want. The system also utilises two different diameter pipes to produce a sound with much more depth than Alfa's race exhaust and at idle it retains a purposeful note where as the Standard system can sound flat and unfinished. We have designed the system so you can remove the Helmholtz resonator and fit the SuperSport right hand pipe on instead for those days you want to make NOISE! Weight 6kg only 1.5 kilos heavier than Alfa's race system. See our Video. Performance Category: Fast Road.

    Our Price: £707.50 excl tax







4C Engine management


  • TCU

    NEW Transmission Electronic Control Unit.
    This has been reprogrammed to perform faster gear shifts.
    Price includes a £150 plus VAT surcharge which is refundable on return of your old ECU as long as it is in good working order.

    Our Price: £649.17 excl tax




  • Injector
    FUEL injector.
    For tuned engines producing in excess of 380hp
    PETROL

    Our Price: £135.00 excl tax




  • Lead
    CAN-USB Deltalog DB9.
    This is a programming lead for the race ECU but it also records engine data to an SD card so you can check the engine parameters at a later date. .

    Our Price: £187.50 excl tax




  • Lead
    CAN USB Interface-DB9.
    This lead is needed to program the race ECU from a windows operating system.

    Our Price: £100.00 excl tax




  • ECU
    STAGE 2 tune, This is a bespoke ECU for the 4C, It comes with a tune for the standard engine which gives 300 bhp, 20 bhp up on our cloned ECU which is already the fastest tune over a 1/4 of a mile on the Alfa 4C forum. The ECU is fully programmable and can cope with any state of tune. It has a revised launch control strategy, a raised rev limit. It can then be programmed to control a pressure type waste gate which opens a whole new world of possibilities for tuning and is required if you want to run a bigger turbo. This is a plug and play component and it has none of the boost pressure limits of the standard Alfa ECU. To program the ECU in real time it also requires lead CANDB9 - included in kit.

    Emitting 95db at 4,000rpm when combined with Alfas 'Sport' exhaust system.

    Our Price: £1950.00 excl tax




  • ECU
    BRAND NEW ECU STAGE 1 tune, this is the standard Alfa ECU remapped to 280bhp 420 Nm. Turbocharged petrol engines have always been regarded as the sports flagship engine for good reason. They boast far higher power & torque figures than a non-turbocharged power-plant with similar displacement. They are also ideal candidates for programming as the ECU also controls the wastegate (turbo boost pressure control) thus allowing more air to be pumped into the engine and the more air in the more power you can get out. Performance Category: Fast Road.
    Alfa 4C ECU Tuning

    Our Price: £825.00 excl tax







4C Filtration


  • AIR filter
    K&N performance air filter. To meet minimum filtration standards, paper air filters must be thick and/or the fibres must be tightly compressed and dense. Therefore paper elements that provide adequate filtration are more restrictive to air flow by design. Additionally, as a paper filter becomes more and more clogged, the pressure inside the filter drops while the atmospheric air pressure (approximately 14.7 psi at sea level) outside the filter remains the same. It's like using your lungs to draw the air out of a plastic milk bottle. When the pressure differential becomes too great, the bottle will collapse. The same thing could happen to your paper filter, although it is unlikely, but what will happen could be just as severe. An excessively high pressure differential created by a restricted filter can literally pull dirt particles through the paper medium. In other words, the performance of a paper filter, i.e. air flow through the filter and its ability to protect your engine, DECREASES near the end of its service interval.
    4C air filter replacement

    Our Price: £56.00 excl tax







4C Cooling





4C Clutch


  • CLUTCH

    Lightened clutch kit for manual gearbox (to be used with flywheel 1750MFLYW) x6 bolts included. Will take over 750 nm so will be able to take the power output of even the most powerful 2.0l conversion
    Weight: 4.58kg.

    Our Price: £730.00 excl tax




  • CLUTCH kit

    Upgraded TCT clutch kit. These are necessary if you start getting to serious power outputs (300+ BHP) they combine the softer engagement of a standard clutch with the durability of a sintered clutch.

    *Uprated pressure plates in both covers.
    *Uprated cover driven straps (to increase lift and power to the clutch)
    *Uprated drive plate friction material on both plates (three compound)
    *Fabricated solid steel plate for the centre of the kit (changing it from cast iron to steel).


    Our Price: £1250.00 excl tax







4C Brakes & steering


  • Brake Hose Set

    YELLOW Goodridge braided brake hose kit. Goodridge stainless steel braided brake lines have become the industry standard in professional motorsports where the ultimate in braking is required.
    There is no room for volumetric expansion, or "mushy brakes" caused by rubber brake lines.

    A highly efficient braking system allows you to get deeper into the corner and onto the accelerator faster.
    Performance Category: Race, Track Day, Fast Road.

    Our Price: £73.29 excl tax




  • BRAKE caliper kit

    In RED
    x2 FRONT calipers
    x2 pin kits
    x2 REAR calipers
    x2 REAR caliper carriers


    Our Price: £695.00 excl tax




  • BRAKE pads

    DS 2500 FRONT brake pad set (fast road or Track day use). Ferodo DS2500 is amongst the foremost high performance track day pads in the business. It offers excellent refinement for such a high performance pad.

    The main characteristics of DS2500 are:
    Track day and light race use for all vehicle types.
    Road style refinement but with race material ability to withstand heat with respect to life.
    Average friction coefficient of 0.42 over working temperature range of 20°-500°C.

    Performance Category: Track Day, Fast Road.

    Our Price: £147.09 excl tax




  • BRAKE caliper kit

    In YELLOW
    x2 FRONT calipers
    x2 pin kits
    x2 REAR calipers
    x2 REAR caliper carriers


    Our Price: £695.00 excl tax




  • Tyre
    205/40ZR18 86Y Pirelli PZero ARR (FRONT tyre).

    Our Price: £108.88 excl tax




  • Tyre
    235/35ZR19 91Y XL Pirelli PZero ARR (REAR tyre).

    Our Price: £132.71 excl tax




  • BRAKE pads

    REAR set
    (with x2 wear indicators)

    Our Price: £60.00 excl tax




  • Brake Hose Set

    RED Goodridge braided brake hose kit. Goodridge stainless steel braided brake lines have become the industry standard in professional motorsports where the ultimate in braking is required.
    There is no room for volumetric expansion, or "mushy brakes" caused by rubber brake lines.

    A highly efficient braking system allows you to get deeper into the corner and onto the accelerator faster.
    Performance Category: Race, Track Day, Fast Road.

    Our Price: £73.29 excl tax




  • BRAKE pads
    DS 2500 REAR brake pad set (fast road or Track day use). These pads are an absolute must on the 4C, they are suitable for road and race use. It offers excellent refinement for such a high performance pad.

    The main characteristics of DS2500 are:
    Track day and light race use for all vehicle types
    Road style refinement but with race material ability to withstand heat with respect to life
    Average friction coefficient of 0.42 over working temperature range of 20°-500°C.

    Performance Category: Track Day, Fast Road.

    Our Price: £134.69 excl tax







4C Suspension


  • SHOCK absorber

    KW Variant 2 "inox-line"
    • Adjustable rebound damping - x16 clicks
    • Coilover
    • Stainless steel construction
    • Set of x4 shocks
    (documentation and adjusting tools included)
    .
    Part certificate
    Installation manual
    Adjustment manual

    Our Price: £1668.33 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.
    Black Series for Motorsport use: Race, Rally and Track
    .

    Our Price: £24.70 excl tax




  • POWERFLEX bush

    Lower engine mount polyurethane bush insert. Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement.

    Our Price: £22.45 excl tax




  • SHOCK absorber

    NITRON 3-way set
    Piggyback fronts and remotely mounted reservoir for the rear allows quick adjustment of rebound WITH fast and slow compression damping
    (x4 supplied)
    .

    Our Price: £2995.00 excl tax




  • SHOCK absorber

    NITRON coil over set with adjustable preload and a single dial which adjusts the compression and rebound damping together.
    (x4 supplied)
    Weight: front 2.2kg each, rear 5.5 kg each
    .

    Our Price: £2295.00 excl tax




  • BUSH

    Front upper and lower wishbone replacement INNER bush (x8 supplied).
    This a is set of rose joints to replace all the rubber bushes in the front suspension with spherical joins , this is really aimed at track users while it does help on the road it is only really needed when you are using sticky tyres. Performance Category: Race
    .

    Our Price: £520.00 excl tax




  • FAST ROAD spacers

    This is the set of 8 modified wishbone spacers for improved steering/handling that I recommend for track day use, these change the camber and castor on the car, together with our toe settings these transform the handling of the 4C.
    Performance Category: Track Day.
    How to set up the front suspension on the Alfa 4C
    Reviews of our Alfa 4C Geometry set up

    Our Price: £250.00 excl tax




  • RACE spacers

    Set of 8 modified wishbone spacers for improved steering/handling, these increase significantly the range of camber that the car can have and also increase the castor of the car, together with our toe settings these transform the handling of the 4C
    (these will increase wear on the inside edge of the tyre)

    Performance Category: Race.
    How to set up the front suspension on the Alfa 4C
    Reviews of our Alfa 4C Geometry set up

    Our Price: £250.00 excl tax




  • PLATE

    FRONT lower wishbone shim
    This is used for minor adjustments of the geometry on the 4C.
    Performance Category: Race, Track Day and Fast Road (0.87mm)
    .

    Our Price: £8.00 excl tax




  • SUSPENSION arm

    FRONT - LEFT UPPER wishbone
    The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings. In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.

    Performance Category: Race, Track Day.

    Our Price: £451.00 excl tax




  • SUSPENSION arm

    FRONT - RIGHT UPPER wishbone
    The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings. In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.

    Performance Category: Race, Track Day.

    Our Price: £451.00 excl tax




  • SUSPENSION arm

    FRONT - LEFT LOWER wishbone
    The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings. In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.

    Performance Category: Race, Track Day.

    Our Price: £480.00 excl tax




  • SUSPENSION arm

    FRONT - RIGHT LOWER wishbone.
    The silent block bushes in the body side of the wishbone are replaced with cross axis joints. They consist of a ball with cylindrical taper on both sides and a continuous bar through the middle. Although they are similar to the ball joint in terms of function and structure, their anchorage corresponds to that of rubber bearings. In contrast to rubber bearings, cross-axis joints are able to transfer extremely high dynamic forces and have no aligning torque. Cross-axis joints are preferably used if a stiff control arm connection is desired and they add a far greater degree of control to changes in dynamic camber.

    Performance Category: Race, Track Day.

    Our Price: £480.00 excl tax







4C Gearbox


  • TCU

    NEW Transmission Electronic Control Unit.
    This has been reprogrammed to perform faster gear shifts.
    Price includes a £150 plus VAT surcharge which is refundable on return of your old ECU as long as it is in good working order.

    Our Price: £649.17 excl tax




  • Differential
    Quaife ATB Helical limited slip differential.

    Our Price: £620.00 excl tax







4C Exterior Bodywork


  • AIR vent covers

    Carbon fibre - coverings
    (x3 pieces)
    For plastic dashboards ONLY


    Our Price: £379.00 excl tax




  • REAR spoiler

    Carbon fibre
    Coupe models ONLY


    Our Price: £319.00 excl tax




  • STEERING WHEEL side covers

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £186.30 excl tax




  • INTERIOR door ornament

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £166.88 excl tax




  • INSTRUMENT gauge cover

    Carbon fibre - rear covering
    MATT finish


    Our Price: £195.00 excl tax




  • PADDLE shifters

    Carbon fibre - add on part
    (LEFT and RIGHT supplied)
    RED tape infill
    (plastic shifters just shown for positioning)
    .

    Our Price: £285.00 excl tax




  • TYPE plate

    Carbon fibre - 'Alfa Romeo 4C' lettering
    Colour: RED


    Our Price: £85.00 excl tax




  • A-PILLAR ornament

    Carbon fibre - replacement part
    (external)


    Our Price: £160.20 excl tax




  • MIRROR caps

    Carbon fibre - replacement part

    Our Price: £249.00 excl tax




  • FUEL cap

    Carbon fibre

    Our Price: £106.80 excl tax




  • DOOR handle

    Carbon fibre
    Exterior
    (x2 supplied)


    Our Price: £132.81 excl tax




  • HEADLIGHT frames

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £284.80 excl tax




  • INTERIOR door card

    Carbon fibre - replacement part
    (LEFT and RIGHT supplied)


    Our Price: £1335.00 excl tax




  • CENTRAL console tunnel

    Carbon fibre - replacement part

    Our Price: £703.00 excl tax




  • CONTROL button

    Carbon fibre - covering
    (set of x4)


    Our Price: £141.73 excl tax




  • CONTROL cover

    For air conditioner controls
    Carbon fibre - covering


    Our Price: £231.00 excl tax




  • INSTRUMENT gauge surround

    Carbon fibre - replacement part
    MATT finish


    Our Price: £266.52 excl tax




  • AIR vent covers

    Carbon fibre - covering
    Models with leather dashboard ONLY
    (set of x4)


    Our Price: £294.00 excl tax




  • SEAT BELT ring cover

    Carbon fibre - covering
    (x2 supplied)


    Our Price: £123.71 excl tax




  • DOOR sill protector

    Carbon fibre - covering
    RED lettering.
    (x2 supplied)


    Our Price: £220.00 excl tax




  • DOOR sill protector

    Carbon fibre - covering
    (two supplied)


    Our Price: £160.20 excl tax




  • SHARK FIN side skirt

    Carbon fibre - add on part
    (LEFT and RIGHT supplied)


    Our Price: £444.79 excl tax




  • REAR spoiler

    Carbon fibre
    Spider models ONLY
    .

    Our Price: £320.00 excl tax




  • DOOR infills

    Carbon fibre

    Our Price: £142.00 excl tax




  • FRONT bumper trim

    Carbon fibre - covering
    'V' shield[


    Our Price: £204.00 excl tax




  • FRONT splitter

    Carbon fibre - add on part

    Our Price: £712.20 excl tax




  • STEERING wheel shroud

    Carbon fibre - replacement parts
    Coupe models only (without cruise control)


    Our Price: £231.00 excl tax




  • TAIL light frame

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £302.17 excl tax




  • AIR extractor trim

    Carbon fibre - rear covering
    Spider models ONLY
    (LEFT and RIGHT supplied)


    Our Price: £240.30 excl tax




  • FRONT grille inserts

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £258.00 excl tax




  • SPEAKER frame

    Carbon fibre - replacement part
    (x2 supplied)
    Colour: RED


    Our Price: £212.00 excl tax




  • INTERNAL door handles

    Carbon fibre - covering
    (LEFT and RIGHT supplied)


    Our Price: £186.00 excl tax




  • GEAR selector cover

    Carbon fibre - covering
    (Including switch)
    .

    Our Price: £70.31 excl tax




  • PILLAR trim

    Carbon fibre
    Internal
    (LEFT and RIGHT supplied)
    .

    Our Price: £258.00 excl tax




  • DASHBOARD trim

    Carbon fibre

    Our Price: £106.80 excl tax




  • MTA control cover

    Carbon fibre - covering
    (Italia colours/brushed)
    .

    Our Price: £200.00 excl tax




  • INTERIOR light frame

    Carbon fibre - covering.

    Our Price: £80.10 excl tax







4C Interior Bodywork


  • HARNESS

    Willans Club 4x4 Saloon Harness
    • FIA approved
    • 3" wide shoulder with 2" lap straps
    • Quick release buckle
    Black
    .

    Our Price: £180.00 excl tax







4C Extras


  • Car Cover
    Indoor car cover with holdall.
    Red with 4C lettering on the rear.

    Our Price: £170.00 excl tax




  • Clips
    STAINLESS silicone hose clips.
    For Samco hose kit TCS654 (x6 supplied).

    Our Price: £7.65 excl tax